Thermal Cycling Equipment – Thermal End Effetor – Rapid Temperature Test – Thermal Test Equipment – Thermal End Effector

Thermal Cycling Equipment – Thermal Inducing Systems – Rapid Temperature Test – Thermal Cycling Equipment – Thermal Test Systems

Thermal Cycling Equipment – Thermal End Effetor – Environmental Stress Testing – Environmental Stress Test – Thermal End Effector

Thermal End Effector – Temperature Cycling Test – Temperature Test Cycle – Thermal End Effetor – Temperature Cycling Test

Thermal End Effectors

The ThermalAir TA-5000/TA-3000 series has a wide range of accessories that are attached to the ThermalAir Stream Arm and Flex Hose located at the end of Thermal Head output gas nozzles.

They incorporate an intuitive full funtion for the ThermalAir users with the flexibility to accurately test in a variety of ways at the thermal test workstation.

The TA-5000A/TA-3000A can also be used with an Thermal End Effector adapters interfaced to the end of Thermal Head Arm and Stand, designed to adapt to the end users device under test. The exact use of this device depends on the users thermal test application.

Customize Your Temperature Testing Application

Compact! Plus Performance!

Eco-Friendly with up to 50% power energy savings
Ultra-stable DC temperature control with smart DC energy efficient chiller
Built-in color touch screen display GUI. The front panel touch display easyicons makes for convenient user operation and intuitive user friendly menus
No voltage or frequency configuration needed– one system worldwide
Quiet low audible noise for engineering laboratory
No LN2 or CO2 required [ Built in Chiller & Air Dryer ]

Thermal Test Cycling Solutions

Temperature Forcing Systems | Thermal Test Systems | Thermal Cycling Equipment | Temperature Cycling Test | Thermal Test Equipment | Thermal End Effetor

Customize Your Test Application

The TA-5000A can also be used with an Thermal End Effector adapters interfaced to the end of Thermal Head Arm and Stand, designed to adapted with the end users device under test. The exact use of this device depends on the users thermal test application.

Learn More

Bring Precise Temperature Directy to the Test

Thermal End Effector – Thermal Inducing Systems – Temperature Test Cycle – Thermal Test Equipment – Thermal Test Equipment

ThermalAir Series of Thermal End Effectors

The ThermalAir TA Series of temperature forcing and localized inducing systems have a wide range of accessories that are attached to the ThermalAir Stream Arm located at the end of Thermal Head output gas nozzles.

The TA-5000A can also be used with a Thermal End Effector adaptors interfaced to the end of Thermal Head Arm and Stand, designed to adapt to the end users device under test. The exact use of this device depends on the users thermal test application and the size and location of the part being tested.

MPI Thermal systems have a wide variety of Thermal End Effectors to accommodate the user engineer test broad. When other components and rigid cables are to close proximity of the single device that requires thermal testing, a thermal end effector adapter can be used. In these cases where the standard ThermalAir system thermal glass cap enclosure cannot be used, a thermal end effector can be easily connect to the TA-5000A thermal head gas output nozzle (no tools required).

Learn More

ThermalAir Accessories Demonstration Videos

Non-Conductive Shroud

TA5000A Head Display & Non-Conductive Shroud

Thermal Air Head Display & Non-Conductive Shroud in Action

Hi-Temp Silicon Insulation Foam Rubber – Non-Conductive Shroud Close Up

Non-Conductive Shroud Close Up