Environmental Stress Testing Cycling Test Chamber
TA-5000A Thermal Stream
with Glass Cap
Environmental Stress Testing Chamber
TA-5000A Test Enclosure
with Hood
Environmental Stress Test System
TA-5000A Environmental Stress Testing Chamber
with Flex Hose
Environmental Stress Testing Temepratures
TA-5000B Environmental Stress Chamber
with Flex Hose
Specification Features & Benefits
- Ultra Cold Temperatures maintained at 50&60Hz
- Dual Touch Screens Front Panel & Thermal Head
- Plug-in anywhere from 200~250VAC, 1Ø
- ECO Smart DC system for up to 50% energy saving
- No voltage configuration to use at different locations
- Versatile Boom & Stand – Extended reach standard
- SSD for thermal file management and data logging
- Control Heated dry air purge for frost free operation
- One touch Temp Cycle, Ramp, Soak and Dwell
- Ultra low audible noise for quiet engineering lab use
Environmental Stress Test | Environmental Stress Test Chambers | Environmental Stress Cycling Test | Environmental Stress Chambers | Environmental Stress Testing | Environmental Stress Test Systems | Environmental Stress Equipment
System Performance
- Airflow: High capacity 10 l/s (20 scfm) continuous airflow optimizes temperature transition rate and throughput.
- Typical Temperature transition rate: -55° to +125°C: approximately 10 seconds +125° to -55°C: approximately 10 seconds
- Temperature Control: Environment Air or External DUT sensing directly at the DUT case to ±1.0°C
- Temperature control Sensor Ports: Type T or Type K thermocouple, and 100 ohm RTD
- Temperature set, display and resolution: ±0.1°C
- Temperature Accuracy: 1.0°C ( calibrated to NIST standard)
- Remote interface ports: Four: IEEE-488, RS232C, SOT/EOT/SFF, And Ethernet, 4 USB-Type A, 1 USB-Type B, VGA, LAN, PLUS Auto Start Test & End of Test for automatic temperature cycling Hot-Cold-Amb. All this makes for simple control and service ability.
Temperature Cycling Test Chambers
MPI Thermal Test Chambers meet the demand for localized environmental temperature testing.
The ThermalAir temperature test equipment is used for thermal test of semiconductor, automotive sensors,fiber optic components, microwave, hybrids, MCMs, PCBs or any type of electronic and non-electronic parts. Our temp cycle systems connect to your test setup to bring temperature test capabilities directly to your bench top or test station.
Temperature Cycling Test Chamber Clamshell Model
Temperature Cycling Test Chamber Hood Model
With quality construction, this innovative technology allows you to perform temperature simulation tests in situ, at a specific location, at your tester station, test bench, or directly on the unit under test.
Environmental Stress Test | Environmental Stress Test Chambers | Environmental Stress Cycling Test | Environmental Stress Chambers | Environmental Stress Testing | Environmental Stress Test Systems | Environmental Stress Equipment